Rolling Swivel SW-A12
The workhorse swivel for trolling, jigging and bottom rigs. Twin SUS-316L stainless rings on a precision ball-bearing barrel — turns under full load and won't seize after a season of saltwater.
- ● 384 in stock
- ✓ Ships within 48h
- ✓ DDP to 38 countries
- ✓ 30-day no-quibble returns
Built to turn under load.
SW-A12 uses a single hardened ball-bearing race housed between two welded SUS-316L stainless rings. Where a cheap rolling swivel will gall and stop spinning at 60% of its rated load, SW-A12 keeps rotating right up to its breaking point.
We polish the bearing race in-house and assemble each piece by hand. Every batch is destructive-tested at 100% of its rated load on a Shimadzu universal tester — the data sheet ships with the bag.
Use it for offshore trolling, jigging at depth, and any wind-on leader where line twist will ruin your day.
-
A
Single-piece welded ringNo solder point to corrode or fail under shock load.
-
B
Hand-polished bearing raceRotational drag < 0.04 N·m at full load — measured.
-
C
PVD matte coating, optionalReduces flash in clear-water conditions. No effect on strength.
-
D
100% load tested, lot-tracedEach lot has a serial; pull the test data from the QR on the bag.
| Size | L (mm) | A (mm) | T (mm) | Break (kg) | Break (lb) | SKU |
|---|---|---|---|---|---|---|
| #12 | 18.0 | 3.0 | 0.8 | 14 | 31 | SW-A12-120 |
| #10 | 22.0 | 4.0 | 1.0 | 28 | 62 | SW-A12-100 |
| #8 ● | 28.0 | 5.4 | 1.2 | 45 | 99 | SW-A12-080 |
| #6 | 32.0 | 6.5 | 1.4 | 68 | 150 | SW-A12-060 |
| #4 | 38.0 | 7.8 | 1.7 | 95 | 209 | SW-A12-040 |
| #1/0 | 46.0 | 9.2 | 2.0 | 120 | 264 | SW-A12-010 |
